Menu
Engineering Services
Product Lines
Resources
About
Shop
Engineering Services
Product Lines
Resources
About
Shop
Swagelok Northern California
Engineering Services
Product Lines
Resources
About
Shop
Swagelok Northern California
/Procuts%201200x400%20(compressed)/Products%201200x400_%20(1).png?width=1200&name=Products%201200x400_%20(1).png "Products 1200x400_ (1)")
/Swagelok%20Northern%20California%20Resource%20Collections%20440x340%20Check%20Valves%20(1)%20(1).png?width=300&name=Swagelok%20Northern%20California%20Resource%20Collections%20440x340%20Check%20Valves%20(1)%20(1).png "Scroll down this page for more info. Fill the form to get details.")
Swagelok specializes in two types of check valves: poppet valves and lift valves. In fact, we offer nine series of poppet and lift valves. Our primary poppet valve lines—the C, CA, CH, CP, and CPA series—can withstand working pressures as high as 6,000 psig and temps ranging from -50 F to 400 F. Cracking pressures range from 1/3 to 600 psi, flow coefficients range from 0.10 to 4.7, and size ranges from 0.125 in. to 1 in. Our other lines include the IPT-series, the 50-series, the CHP-series UHP valves, and CW-series, an all-welded, high-purity line.
Scroll down to learn more about the poppet check valves and lift check valves available. Fill the form on this page to access all Swagelok check valve catalogs.
Tip: We also offer application support and a collection of resources on valve selection and sizing.
/50%20Series%20Check%20Valves%20(1).png)
These lift check valves limit reverse flow under pressures up to 6000 psig (413 bar) and temperatures up to 900°F (482°C). Forward flow lifts the poppet, opening the valve. Reverse flow seats the poppet against the orifice, closing the valve. The lift check valve is gravity assisted and must be mounted horizontally, with bonnet nut on top.
/All%20Welded%20Check%20Valves%20-%20CW%20Series%20(1).png)
The all-welded design of our CW Series valves provides reliable containment of system fluid. Forward flow starts at less than 2 psig (0.14 bar) pressure differential. The valve closes with less than 2 psig (0.14 bar) back pressure. 316L SS body offers enhanced material purity. Choice of standard or high-purity wetted surface finishes.
/CPA%20Series%20Check%20Valves%20(1).png)
Every C, CA, CH, CP, and CPA series check valve is factory tested for crack and reseal performance with a liquid leak detector. Check valves with adjustable cracking pressures, CA and CPA series, are tested at two pressure points. Every valve is tested at a low-pressure setting and at a high-pressure setting. Valves must seal in 5 seconds at appropriate reseal pressure.
/C%20Series%20Check%20Valves%20(1).png)
/CH%20Series%20Check%20Valves%20(1).png)
/CA%20Series%20Check%20Valves%20(1).png)
/Seal%20Materials%20-%20All%20Check%20Valve%20Series%20(1).png)
Fluorocarbon FKM O-rings are standard in 316 stainless steel valves; Buna N O-rings are standard in brass valves. Other elastomer seals (poppet bonding material and O-ring) are available. Springs of alloy 400 or alloy C-276 are available in some sizes. Valve bodies of alloy 400, carbon steel, aluminum, or other alloys are available in some sizes.
/CH%20Series%20Check%20Valves%20-%20Seal%20Kits%20(1).png)
All kits include instructions. C, CP, CA, CPA Series Seal Kits contain O-ring; Spring Kits contain spring and two cracking pressure labels. CH Series Seal Kits contain bonded poppet, body seal O-ring, PTFE backup ring; Spring Kits contain spring and two cracking pressure labels. CA, C Series Metal Gasket Kits contain PTFE-coated gaskets. Other kits are available.
/Thumbs%20340x170%20B.png)
/Thumbs%20340x170%20B%20(1).png)
/CP%20Series%20Check%20Valves%20(1).png)